Hitachi NT50AE2 3/4-Inch to 2-Inch by 18 Gauge Brad Nailer

The NT50AE2 is the ideal 18-gauge finish nailers for trim work, furniture and other finish applications. It accepts 5/8- to 2-inch, 18-gauge fasteners. The new selective actuation switch lets the user easily select bump fire actuation for quick brad nailing when precise placement is not required. By simply flipping the switch, the user transitions to sequential fire for specific nail placement. At only 2.2 pounds this nailer is well-balanced and lightweight to make finish work a breeze. The elastomer grip adds comfort while preventing slippage. The visual nail reload indicator located on the magazine alerts the user when nail quantities are low so that blank drives are avoided. The NT50AE2 features a tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use. It has been engineered with the safety behind the narrow nosepiece and a short center height to allow for nail placement in hard to reach areas and into tight corners. A simple turn of the depth of drive dial allows the user to easily adjust the drive depth, accommodating woods of varying density for a professional finish every time. The new no-mar tip on the nose protects the work piece from markings. An easy to use 360 degree adjustable exhaust port keeps dust, debris and oil off the finish project.